Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Printer Name

Bed Size

(LxWxH mm)
Types of MaterialSoftware


MakerBot Replicator (5th Generation)

295 x 195 x 165

PLAMakerBot Desktop100

Can use Ethernet through MakerBot Desktop to use this printer or the USB stick.

We have the SmartExtruder+ attached to it right now.

MakerBot Replicator 2

285 x 153 x 155PLAMakerBot Desktop100Old, reliable, printer. That's about it.

Flashforge Dreamer

230 x 150 x 140PLA, PVA, HIPS, nylon, and moreFlashPrint100One of the major benefits to this printer is the supports. The software allows you to create tree-like supports which are really awesome. It is a reliable printer that can also do some dual-colors.


285.4 x 270.4 x 230PLA, ABSCubePro70This printer is basically the only one that we should print ABS on, as ABS generally requires a heated area to be printed in to avoid shrinking. The software is clunky and the pre-printing process is a pain in the rear, but it's fine.
Monoprice Maker Select V2200 x 200 x 180

PLA, XT Copolyester,
HIPS, Jelly, Foam, Felty

OctoPrint, Cura, Simplify 3D100

"Hobbyist" level of 3D printer. Very versatile and customizable through software such as Cura. There are tons of settings to change and adjust.

Make sure you calibrate the z axis with this guide linked here. Or here.

3DS Projet 460     
Stratasys Eden 260ES     



  • No labels